Skip to content
Iced latte in a tall glass on the left and hot latte in a ceramic cup on the right.

How to Make a Latte at Home

Pull a double espresso into an 8 fl oz (240 mL) cup and add steamed milk with a thin layer of fine foam. Start with 36 g of espresso and 160 g of poured milk. A balanced latte should taste creamy and mellow, with enough espresso flavor to carry through the milk.

For drink sizes, milk amounts and texture comparisons, see Espresso Drinks Explained.

Latte at a glance

  • Espresso: 36 g (one double shot)
  • Cold milk for the pitcher: Start with 180–200 g
  • Steamed milk for the cup: Pour about 160 g
  • Cup: 8 fl oz (about 240 mL)
  • Texture: Silky milk with a shallow layer of fine foam

With the same 36 g espresso, our home recipes start at 160 g of poured milk for the latte and 100 g for the flat white. Both can have a thin layer of microfoam. The larger milk pour makes the latte taste milder.

Choose the cup and measure the milk

Start with the 8 fl oz cup in the recipe. If you use a larger mug, pour the same amount on your first attempt and taste before topping it up. If a smaller cup fills before you reach 160 g, stop below the rim. More air in the milk makes the same weight take up more room.

Use enough cold milk in the pitcher to cover the steam tip once you begin swirling. About 180–200 g of cold milk is a practical starting fill for a pitcher with room for expansion. The exact fill depends on the shape of your pitcher and how your machine steams. Leave enough room to swirl without spilling.

Measure the milk in the cup when you compare recipes. The amount in the pitcher includes any milk left behind after the pour. If you use whole milk, its creamy texture makes it easy to judge whether the coffee comes through. Use the milk you actually like to drink when deciding on your final recipe.

Pull the espresso, steam the milk, and pour

1. Pull the espresso into the cup

Warm the cup, empty it, then place it on your scale and tare it. Pull your usual double espresso. If your basket is designed for 18 g of ground coffee, 18 g in and 36 g out is a practical starting point. Use a dose that fits your basket.

Taste the shot on its own if the latte has been coming out harsh or hollow. A sweet, balanced espresso will be easier to taste through the milk. Stir or swirl the espresso just before pouring if it has been sitting while you steam.

2. Steam the milk for a thin layer of foam

Glossy steamed milk in a stainless steel pitcher.
Look for a glossy surface with very few visible bubbles before you pour.

Purge the steam wand according to your machine’s instructions. Place the tip just under the surface, slightly off center. Turn on the steam and lower the pitcher a little until you hear a soft tearing sound. Let the milk rise slightly, then lift the pitcher enough to move the tip deeper and stop adding air.

Follow the steaming sequence.

Keep the milk rolling until it looks evenly glossy. A good latte needs enough air for a thin finish while keeping most of the pour fluid. If the milk has expanded so much that it moves in clumps when you swirl, shorten the time you spend adding air on your next attempt.

For dairy milk, 140–149°F (60–65°C) is a useful starting range. Turn off the steam before taking the wand out, then wipe and purge it. Swirl the pitcher immediately before you pour so the milk and fine foam move together.

3. Pour and stop at your target weight

Steamed milk pouring into espresso in a tall glass on a coffee scale.
Tare the scale with the espresso already in the glass, then weigh the milk as you pour.

Place the cup containing the espresso on the scale and press tare. Check that the display reads zero before adding milk so the scale measures only what you pour. Pour a thin, steady stream into the center so the milk and espresso blend as the cup fills. Bring the spout a little closer near the end if you want a small amount of fine foam to settle on the surface.

Stop near 160 g of poured milk or when the cup is comfortably full. Take a sip from the rim. The milk should soften the espresso, and the finish should still taste of coffee.

Adjust the balance for the cup you use

Taste your first latte at the same temperature each time if you are comparing two recipes. If the texture is silky but the espresso fades after the first sip, try 140 g of milk with the same 36 g shot. If the coffee tastes stronger than you like, try 180 g as long as the cup has room. Keep the espresso, milk type, and steaming technique steady while you compare.

Keep the finish point steady with the milk temperature guide.

For a larger latte with a similar coffee-to-milk balance, pull a second espresso using the same dose and yield. Combine the shots and weigh 45 g of brewed espresso into a larger cup. Start with 200 g of poured milk. Both recipes use about 1 g of brewed espresso for every 4.4 g of poured milk. Pulling a second shot at the same yield lets you add espresso without changing the extraction you already like.

How a latte compares with a flat white and cappuccino

Latte in a tall glass, flat white in a blue cup, and cappuccino in a clear cup with a thicker foam layer, from left to right.
From left to right, latte, flat white, and cappuccino. Our latte and flat white both start with 36 g of espresso, with 160 g of steamed milk for the latte and 100 g for the flat white. The cappuccino has a deeper layer of airy foam.
Cappuccino

36 g espresso + 90 g poured milk and foam. A deeper, softer foam layer.

Flat white

36 g espresso + 100 g poured milk. A shallow, silky microfoam finish.

Latte

36 g espresso + 160 g poured milk. A larger, milder drink with a thin foam finish.

These are the starting recipes used in our guides. The images illustrate texture and relative size. They are not measured test results.

Compare the amount of milk when choosing between a latte and a flat white. Both can look similar from above because the foam is shallow. For a cappuccino, pay attention to the first sip. It usually has a more noticeable cushion of airy foam at the rim.

For the smaller silky drink, use the flat white recipe.

How to Make an Iced Latte

For a 12 fl oz (355 mL) glass, start with 36 g of espresso, 130 g of cold milk, and about 90 g of ice. The ice adds water as it melts, so this recipe starts with less milk than the hot latte.

  1. Fill the glass. Add the ice to a sturdy glass and pour in the cold milk.
  2. Pull the espresso. Brew a double shot into a separate cup, aiming for 36 g of espresso.
  3. Pour and stir. Pour the espresso over the milk and ice, then stir briefly. Taste and add a splash of cold milk if you want a milder latte.

Fix your next latte

For a deeper foam layer in a smaller cup, compare the cappuccino recipe.

Latte troubleshooting
What happened What to change next
The espresso gets lost under the milk. Reduce the amount poured and keep the same espresso recipe.
The latte is too intense for your taste. Add a little more milk if the cup has room. Taste the espresso on its own if the finish is harsh.
A thick, dry cap sits on top. Add air for less time. Keep the milk rolling and swirl before pouring.
The first part of the pour is thin, then foam drops out in clumps. Swirl and pour sooner. If the milk was stiff as soon as you stopped steaming, reduce how much air you add.
The cup is nearly full before you reach the target weight. Stop below the rim. Use a larger cup on the next attempt if you want to keep the same milk weight.

Common questions

Can I make a latte without a steam wand?

Yes. Warm the milk and use a handheld or dedicated milk frother. With a handheld frother, start briefly with the whisk just below the surface. Swirl before pouring. If the milk separates into a large cap and a thin liquid layer, shorten the frothing time next time.

Can I make it with oat milk?

Yes. A barista-style oat milk is a practical starting point. Follow the carton’s temperature guidance if it gives one. Try it with the same shot and poured weight first. If its flavor dominates the espresso, reduce the pour a little before changing the shot.

Previous article Americano vs. Long Black
Next article How to Make a Flat White at Home

Leave a comment

Comments must be approved before appearing

* Required fields

Other categories to explore
Get to know other popular tags

Similar Articles

Your Cart 0
Subtotal: $0.00
Bundle Savings: $0.00
Subscription Savings: $0.00
Total: $0.00
30-Day Better Espresso Guarantee
Better espresso or we'll refund your purchase.
Secure Checkout
Clicky
Title
Subtitle
Content here