How to Make a Cortado at Home
Pour equal weights of espresso and lightly steamed milk, then adjust by a few grams to keep the coffee flavor clear.
For a latte, flat white, or cappuccino made with dairy milk, start with a milk temperature of 140–149°F (60–65°C) in the pitcher. Try the lower end first if you prefer to sip sooner. For plant milk, follow the carton’s steaming guidance if it provides any. Measure the milk just before you pour so you can repeat the result the next time you make the same drink.
For drink sizes, milk amounts and texture comparisons, see Espresso Drinks Explained.
Use the milk temperature in the pitcher as your reference. If the finished drink feels too hot, cools too quickly, or separates after pouring, use the table to choose what to adjust first.
| What you want to change | What to try first | What to check |
|---|---|---|
| You want to sip your dairy latte sooner | Finish the milk near 140°F (60°C), the lower end of the starting range. | After your usual wait, does the drink feel more comfortable to sip? |
| The drink cools before you finish it | Prewarm the cup, empty it fully, and keep the milk at your usual temperature. | Compare how warm the drink feels after the same wait. |
| Oat, soy, or almond milk separates in the cup | Check the carton’s guidance. If it allows a lower temperature, try a slightly cooler pour with the same espresso and carton. | Does the milk stay smooth for the same amount of time after pouring? |
The number on your milk thermometer describes the milk in the pitcher. The temperature at the first sip also depends on the espresso, the cup, the proportions of the drink, and how long it sits after pouring. Two pitchers at 140°F can give you different results if one goes into a warm cup that you drink immediately and the other goes into a cold mug that sits while you clean up.
If the milk reaches your target and the latte still feels cool, try warming the cup and emptying it fully before brewing. Keep the same milk temperature for that test. If the change helps, you have a way to get a warmer first sip with your usual steaming routine.
A smaller cup can benefit from the same check. Use the cup you actually drink from when testing a flat white. If you compare it in a large mug on one day and a small cup on another, you’ve changed both the vessel and how much milk the drink is likely to contain.

A clip-on milk thermometer keeps the reading visible while you steam. Set it up before you start, with the sensing tip immersed in the milk and clear of the pitcher wall and base. If your thermometer specifies an immersion depth, follow it. Use the same probe position each time so your readings are comparable.
For air and circulation alongside temperature, follow the steaming method.

For example, you might shut off the steam at 137°F (about 58°C) and see 140°F (60°C) just before pouring. Write down both readings. If that difference repeats with the same pitcher and amount of milk, the earlier reading gives you a point to stop on that setup.
The pitcher can feel different in your hand when you change its size, shape, or fill level. Once you have used a thermometer to learn how your setup behaves, the feel of the pitcher can serve as a cue to glance at the reading.
Temperature can affect how foam forms and holds. Klimanova and colleagues (2022), in International Dairy Journal, tested processed dairy milk steamed at 30–80°C. Foam properties varied with milk processing and temperature, and the reported optimum was 50–60°C under their conditions. The 60–65°C starting range in this guide is a practical drink comparison. The espresso, cup and your preferred drinking temperature also matter.
If the foam looks coarse at a repeatable temperature, use the microfoam troubleshooting checks.
Use the temperature reading alongside what you can see and taste. If the milk already pours evenly but the drink tastes too hot at the first sip, try the lower end of the range. If you repeatedly get coarse bubbles at the same temperature, keep the temperature fixed and check how you introduce air. If the texture varies from one attempt to the next, weigh the cold milk in the pitcher so you start with the same amount each time.
For oat, soy, or almond milk, follow the instructions for the carton you are using. When it gives no number, record the temperature of a pour you like and use it as your reference. If the drink separates, compare a slightly cooler pour using the same coffee and carton, within any manufacturer instructions. Give both drinks the same time in the cup before judging whether the change helped.
Make two drinks with the same coffee, dose, and shot yield. Use matching cups and start them at the same temperature. If you prewarm one, prewarm both the same way and empty them fully. Use dairy milk from the same carton and finish one pitcher at 140°F (60°C) and the other at 149°F (65°C). Pour the same weight of milk into each cup and wait the same amount of time after each pour before tasting. If your machine switches between brewing and steaming, use the same sequence for both drinks.
Pay attention to three things on each first sip. How warm does the drink feel? Can you taste the espresso clearly? Does the milk still feel smooth? Write down the temperature you prefer and how long you waited before tasting. That gives you a setting to return to when you make the drink on a busy morning.
If you like the flavor and texture at 140°F but want the drink warmer, repeat that version in a prewarmed cup first. If you prefer the hotter pitcher and it still pours smoothly, use that as your starting point next time. Recheck when you switch milk or change your usual cup size.

They can start in the same dairy range. Choose the temperature by tasting the finished drink. If you change the amount of air for a cappuccino, keep your temperature target fixed on the first attempt so you can judge the change in texture on its own.
Start with the machine’s recommended setting for your milk, if it offers one. Check the finished milk in the pitcher with a separate thermometer once so you can connect the setting to the result. If you want to compare two options, change one setting at a time and use the same drink recipe.
Pour equal weights of espresso and lightly steamed milk, then adjust by a few grams to keep the coffee flavor clear.
Use your usual espresso dose, stop at a shorter yield, and taste both shots to find the texture and flavor you prefer.
Mark an espresso with a small spoonful of milk foam. Learn how to get the texture right and adjust the milk to suit the shot.
Leave a comment