How to Make a Cortado at Home
Pour equal weights of espresso and lightly steamed milk, then adjust by a few grams to keep the coffee flavor clear.
A cortado is a small drink made with espresso and roughly an equal amount of warm, lightly textured milk. For a first cortado at home, pour 36 g of steamed milk into 36 g of espresso. Aim for a thin, glossy surface and a sip that still tastes distinctly of the coffee.
The trick is to weigh the milk that reaches the glass. Steam enough for your wand to work comfortably, then pour just what the shot needs. A few grams make a difference in a drink this small.
| What you need | Starting point |
|---|---|
| Ground coffee | 18 g in a basket that fits this dose |
| Espresso in the glass | 36 g |
| Steamed milk poured into the glass | 36 g |
| Serving glass | A heat-safe glass or small cup, around 4 fl oz (120 mL) |
Set out an espresso machine, a scale that fits under the group head, and a small steaming pitcher. A thermometer helps when you’re learning how quickly a small pitcher heats. Whole milk is a practical starting point for a smooth pour. A barista-style oat or soy milk also works if you prefer its flavor with your espresso.
The espresso ratio and the drink ratio describe different steps. The example shot uses a 1:2 brew ratio, with 18 g of ground coffee yielding 36 g of espresso. The 1:1 drink ratio pairs those 36 g in the glass with 36 g of milk. If your usual espresso yields 32 g and tastes balanced, start with 32 g of milk. A serving glass gives you room to pour and sip comfortably, so leave some space at the top.
For a repeatable finishing point, see the milk temperature guide.
Pull an espresso you’d drink on its own. Put the glass on the scale, tare it, and brew your usual shot. Stop at your target yield and let the final drips settle. Note the finished weight. A rough or sour shot will still shape the flavor once you add a small amount of milk.
Fill the pitcher just enough to steam comfortably. Start with enough cold milk to cover the steam tip when you tilt the pitcher, with room for the milk to expand and circulate. A 36 g portion can sit too shallow for the wand to work. A smaller pitcher can help if the wand fits comfortably. You’ll weigh out the 36 g portion when you pour.

Start with the tip just below the surface and listen for a brief, soft hiss. Then lower the tip slightly so the milk circulates and folds in the tiny bubbles. It should look shiny and move freely when you swirl the pitcher. For dairy milk, start near 140°F (60°C) in the pitcher. Follow the carton’s heating guidance for plant milk when available. Turn off the steam before removing the tip from the milk, then wipe and purge the wand.

Tare again and pour to the shot’s weight. Put the glass with the finished espresso on the scale and zero it. Swirl the pitcher once or twice. Pour a thin stream into the center and stop when the scale reads the same weight you recorded for the shot. With a 36 g espresso, the scale should read 36 g of added milk after taring. The glass now contains about 72 g of drink.

Taste the cortado once it cools enough to sip comfortably. With a 36 g espresso, use the first sip and the finish to decide how much milk to pour next time.
For a larger silky milk pour, compare the flat white recipe.
If the espresso itself tastes sharp or harsh, work on the shot first. Once it tastes good on its own, retest the original 36 g milk pour. When comparing milk amounts, keep the coffee, shot yield, and type of milk the same. If you switch from whole milk to oat milk, try the original pour first so you can taste what the new milk changes.

These drinks can use the same double espresso. The milk changes how they feel and how long the coffee stays prominent. The amounts below show how the recipes on Espresso No.1 compare. Cafés use their own proportions.
For an espresso with only a small milk mark, compare the espresso macchiato recipe.
| Drink | What you add | What you taste |
|---|---|---|
| About ½ tsp of soft milk foam | Espresso dominates, with a touch of milk near the surface | |
Cortado |
About 36 g of lightly steamed milk | Espresso stays clear, with milk softening each sip |
| About 100 g of steamed milk with fine microfoam | More milk in each sip, with the espresso still recognizable |
A cortado and a flat white can both have fine microfoam. With the same 36 g espresso, the difference in these recipes comes from the milk pour. The cortado uses 36 g of milk, and the flat white uses about 100 g.
| What you notice | What to try |
|---|---|
| A thick layer of foam lands on top | Add air only briefly. Move the steam tip a little deeper so the milk rolls and the foam stays fine. |
| Milk splashes or forms big bubbles as soon as you open steam | Check the pitcher fill and wand angle. Begin with the tip just below the surface and maintain that position as the milk starts to move. |
| Milk dominates the sip and the finish | Check how much milk you poured. Repeat the same shot with about 4 g less milk. |
| Both the cortado and the espresso on its own taste sharp | Adjust the espresso first. When it tastes balanced, retest with the original milk amount. |
| The drink cools faster than you’d like | Prewarm your heat-safe glass with warm water, then empty it before pulling the shot. Keep your milk temperature the same for that test. |
When the first sip feels mostly like foam and the rest tastes thin, start with texture. Watch the stream coming out of the pitcher. Silky milk should flow evenly, with fine foam mixed through it. Once the pour looks consistent, you can judge whether the drink needs less or more milk.
Yes. Weigh the finished shot and start with about the same weight of milk. For an 18 g single, try 18 g of poured milk. You may still need the same starting amount in the pitcher to steam comfortably. Serve the smaller drink in a demitasse or other small heat-safe cup.
Aim for a shallow, glossy surface over milk that still pours freely. If the foam holds a stiff peak on a spoon or drops onto the espresso as a lump, introduce less air next time and spend the rest of the steaming time circulating the milk.
Use the microfoam texture checks.
Yes. Start by matching the milk to the shorter shot. If your ristretto yields 27 g, try 27 g of lightly steamed milk. Taste it beside your usual cortado if you’re deciding which shot to use. The shorter shot may change the body and finish even with the same espresso-to-milk ratio.
Pour equal weights of espresso and lightly steamed milk, then adjust by a few grams to keep the coffee flavor clear.
Use your usual espresso dose, stop at a shorter yield, and taste both shots to find the texture and flavor you prefer.
Mark an espresso with a small spoonful of milk foam. Learn how to get the texture right and adjust the milk to suit the shot.
Leave a comment