To get better espresso from a Breville Barista Pro, keep the dry coffee amount steady, measure how much espresso reaches the glass and use the controls separately. GRIND SIZE adjusts fineness; GRIND AMOUNT sets grinding time; the cup buttons control brewing. Use the LCD clock to compare shots, then judge the result by taste.
This guide covers the Barista Pro BES878 with its LCD display, using the US/Canada/Mexico instruction book. Check your model and matching manual before following button sequences. The Barista Express, Touch and Impress families use different interfaces.
Instruction reference. Breville BES878 instruction book, US/Canada/Mexico edition Q26. The button sequences below follow its Programming Espresso Shot and Manual Pre-Infusion & Shot Volume sections. Match the model code and edition to your machine before using them.
Your dose is the weight of dry grounds in the basket. Your output, also called yield, is the weight of espresso collected. Both are measured in grams; the seconds shown on the screen measure time.
Choose your first Barista Pro check
| What you notice | Check first | Your next action |
|---|---|---|
The same grinding time produces a different coffee amount
|
Actual dry weight, basket and grind setting | Correct the dose before comparing the next brew. |
Espresso repeatedly rushes
|
Suitable basket fill and even preparation | With those steady, try a small finer-grind adjustment at the same dose and output. |
Espresso barely flows
|
Overfilling, clear outlets and grind fineness | Stop the struggling brew. After checking fill and cleanliness, try a small coarser adjustment if needed. |
The cup button stops at an unexpected amount
|
Espresso weight and the selected shot program | Measure output; use manual mode for a controlled comparison. |
The machine is ready but the drink seems cool
|
Cup, portafilter and preparation routine | Warm the brewing parts before changing the temperature setting. |
FLUSH or DESCALE appears
|
Which maintenance message is displayed | Follow the matching procedure; these are different tasks. |
The grind checks here assume a single-wall basket. A dual-wall basket adds its own outlet restriction, so its flow needs different interpretation. Sudden loss of water delivery also deserves a tank and maintenance check.
Understand what the LCD and controls tell you
The Pro has an LCD interface rather than the classic Express's analog pressure gauge. Its screen helps you follow settings and progress; it does not replace weighing the coffee or tasting the espresso.
| Control or display | What it does | What to remember |
|---|---|---|
| GRIND SIZE selector | Changes grind fineness using the side selector | A displayed number is a setting, not a measured particle size. |
| GRIND AMOUNT dial | Adjusts the timed grinding amount | Seconds do not guarantee a particular dose in grams. |
| FILTER SIZE selection | Selects SINGLE or DOUBLE for the basket size | This does not select single-wall versus dual-wall construction. |
| 1 CUP / 2 CUP | Starts the selected brew or operates manual extraction | The machine does not weigh the drink in the glass. |
| MENU and the GRIND AMOUNT dial | Navigate and select custom shots, temperature and maintenance | The dial has a menu function as well as its normal grinding function. |

The FASTER POUR / SLOWER POUR graphic accompanies grind adjustment. Treat it as guidance about the adjustment direction, not a sensor confirming how your prepared shot actually flowed.
Keep grinding time and shot time separate
Grinding time describes how long the grinder runs. Shot time describes brewing. On the preset brew, the LCD clock begins with PRE-INFUSE, so it includes the initial wetting stage before the main extraction.
Record that whole interval consistently. Comparing it with a timer started at the first drop can make two similar shots appear different.
Choose the basket and a useful starting recipe
The portafilter is the handled holder that locks into the machine. Its removable basket holds the grounds. Identify the basket before choosing a coffee amount.
For the broader preparation differences, see the guide to identifying your espresso setup.
- Single-wall: the normal starting choice for freshly ground beans when grind size can be adjusted.
- Dual-wall: the manufacturer's starting choice for preground coffee. Its restricted outlet changes how flow responds to the coffee bed.
One-cup versus two-cup describes basket size, not wall type. Use the capacity guidance for the actual basket, particularly if you have replaced the original.
The referenced BES878 book lists approximately 16–19 grams for the supplied two-cup baskets. With the original two-cup single-wall basket, 18 grams of grounds and 36 grams of espresso can be a useful first comparison, provided the tamped coffee fits correctly.
This is a starting example to adjust for taste. Avoid forcing the dose into an unsuitable basket or adding grounds just to slow a shot. Keep your coffee, basket and dry amount steady while you learn what a grind change does.
Build a repeatable grinding and preparation routine
Complete the manufacturer's one-time setup and first-use flush before your first espresso. For daily brewing, follow this order:
- Check water and readiness. Seat the filled tank and locked hopper correctly, and let the machine complete its startup. Follow the water and filter instructions for your version.
- Warm the brewing parts. Preheat the glass and portafilter, then dry the basket. Fast heater readiness does not mean cold metal and glass have warmed too.
- Select the basket size. Press the GRIND AMOUNT / FILTER SIZE control to choose SINGLE or DOUBLE as appropriate.
- Grind and weigh. Place the empty, dry portafilter and basket securely on the scale. Press TARE to set the reading to zero. Set the grinding time and grind with the holder in the cradle, then return it to the scale. The reading is the weight of the grounds alone—your dose.
- Prepare the coffee bed. Distribute evenly and tamp level. With the original accessories, use the Razor tool according to its filling guidance; check the final dry weight after trimming.
- Prepare to brew. Remove any dosing funnel, clean the basket rim and lock the portafilter into the group head. Put the empty glass on the scale and press TARE to return the reading to zero. It will now measure only the espresso added.

For manual grinding, hold the portafilter against the cradle's activation switch and release it to stop. This controls grinding directly; it does not weigh the dose automatically.
Recheck the dose after changing grind
A different grind setting can change how much coffee is delivered during the same grinding time. Adjust the duration as needed to restore your chosen dry weight.
For example, if a grind change leaves 19 grams in the basket instead of your chosen 18, correct the dose before judging the next shot. Otherwise, you have changed both fineness and coffee amount.
Control output with manual brewing or a saved shot
The Pro's cup buttons use programmed shot volumes, not a scale under the glass. Measure the collected espresso rather than assuming that the two-cup button always produces the same drink weight.
To choose a measured stopping point for the next comparison, see how to compare brew ratios.
Brew one shot manually
Use manual mode when establishing a recipe or checking an unfamiliar preset:
- Prepare the coffee, lock in the portafilter and tare the glass on the scale.
- Press and hold 1 CUP or 2 CUP for the pre-infusion stage.
- Release the button to begin the main extraction.
- Press the flashing cup button again to stop at your chosen output. Allow for the final drips and record the settled weight.
Keep the pre-infusion duration consistent while testing grind changes. Manual brewing from the normal ready screen controls that shot; saving a custom program is a separate menu operation.
Stir before tasting. Note the dose, grind setting, output, displayed brewing time and a short flavor description. If you normally add milk, assess the finished milk drink too.
Save a custom cup-button program
Once you have a useful baseline, the referenced BES878 uses this sequence:
- Press MENU.
- Turn the GRIND AMOUNT dial to the CUSTOM one-cup or two-cup option, then press the dial to select it.
- Press the corresponding cup button to start with the default pre-infusion. Alternatively, hold that button for your chosen pre-infusion and release it to continue brewing.
- Press the same cup button at the desired stopping point. The display stops flashing and returns to READY, with the custom setting stored.
The stored program is convenient, but recheck the actual weight after changing coffee, grind or basket. Avoid running another full preset just to top up an otherwise controlled shot.
Choose one adjustment from the result
The Pro's side grind selector changes fineness: lower numbers are finer and higher numbers coarser. The current instruction book and official US tutorial suggest 15 as an initial setting. Your working setting depends on the coffee, basket, burr setup and machine version.
For a comparison at a steady dose and output, see a controlled grind comparison.
Retain a working setting when opening a new bag, then adjust as needed.
For a suitably filled, evenly prepared single-wall basket:
- Repeatedly rushing flow: try a small finer adjustment while holding dose and output steady.
- Barely flowing: stop the struggling brew and check overfilling and cleanliness. A small coarser adjustment may then help.
- Different flow between attempts: check actual amounts and preparation before adding further setting changes.
Taste qualifies the result. A slower shot is not automatically better, and the clock alone cannot establish extraction quality. Sharpness, bitterness or dryness can have several causes; compare one deliberate change rather than treating a flavor as proof of one fault.
The adjustable upper burr extends the grinder's range. Consider it after checking external adjustment, dose and cleanliness, using your exact model's procedure one position at a time. Avoid copying an inner-burr number from someone else's machine.
Adjust temperature after the basic recipe repeats
First make the starting state, dose, output and preparation consistent. If you then want to compare temperature, press MENU, use the GRIND AMOUNT dial to select SHOT TEMP, adjust the displayed setting and press the dial to confirm.
Keep the rest of the recipe steady for that comparison. Raising temperature is not a substitute for warming a cold glass or correcting an unsuitable coffee amount.
Keep milk preparation and maintenance consistent
For milk drinks, establish the espresso first. Start with fresh cold milk and use the supplied jug within its markings. Purge the wand as instructed before steaming, then return the steam dial to its upright standby position before removing the wand from the milk. Wipe with a clean damp cloth and purge over the drip tray afterward.
If your next espresso differs, compare readiness and preparation before changing the grind again.
FLUSH is not the same as DESCALE
The FLUSH alert calls for the programmed cleaning cycle using the cleaning disc and tablet as directed. A brief rinse through an empty group head does not replace that cycle.

DESCALE addresses mineral buildup through a separate procedure. Follow the complete matching instructions, including preparation, dial changes and rinsing. The supplies and sequence are not interchangeable.
Keep the basket, portafilter, shower screen, steam wand and grinder maintained between scheduled cycles. If delivery suddenly fails, check the tank's water level and seating. Persistent leaks, grinder jams or error messages need model-specific troubleshooting or manufacturer support before further recipe experiments.
Common Barista Pro questions
What is the best grind setting for a Barista Pro?
Choose it by comparing a suitable dose, measured output, flow and taste. The initial setting is only a place to begin; changing coffee or burr setup can change the useful number.
Is the LCD shot time measured from the first drop?
The preset shot clock starts during PRE-INFUSE. It therefore includes time before espresso appears. Record the same start point whenever comparing shots.
Does DOUBLE mean I have a dual-wall basket?
No. DOUBLE selects the two-cup grinding amount. Basket wall construction is a separate physical choice that the machine does not identify for you.
Should I reset the machine when changing coffee?
Usually, start from your recorded recipe instead. RESET DEFAULTS changes grinding amount, filter-size selection, shot temperature and both cup programs, so it can remove useful settings together.
Do I need a separate grinder to get started?
Begin with the built-in grinder, a suitable basket and measured comparisons. Consider another grinder when you can identify a limitation affecting your coffee and routine. Buying equipment is not the first step in correcting an unmeasured recipe.








Leave a comment