To improve espresso from a Breville Barista Express, match the basket to your coffee, keep the dry coffee amount steady, measure the espresso collected and adjust one control at a time. GRIND SIZE changes the grind; GRIND AMOUNT changes how much coffee the grinder dispenses; the cup buttons control the brew. A familiar pressure-gauge position does not guarantee good taste.
This guide covers the classic Barista Express BES870, using its US/Canada/Mexico instruction book. Check your model code and matching manual: the Express Impress, Pro and Touch have different controls. Instructions and starting settings can also differ between markets and revisions.
Instruction reference. Breville BES870 instruction book, US/Canada/Mexico edition S22. The button sequences below follow its Manual Shot Volume and Adjusting Conical Burrs sections. Match the model code and edition to your machine before using them.
Your dose is the dry coffee weight; your output, also called yield, is the espresso weight collected in the glass. Start with the check that matches your problem.
Choose your first Barista Express check
| What you notice | Check first | Your next action |
|---|---|---|
Too much or too little dry coffee
|
Basket selection, FILTER SIZE and actual coffee weight | Adjust GRIND AMOUNT or use manual dosing. |
Single-wall espresso consistently rushes
|
Suitable basket fill and even preparation | If those are steady, try one small finer-grind adjustment at the same dose and output. |
Espresso barely flows
|
Basket fill, outlet cleanliness and grind | Stop the struggling brew; check filling and cleaning before trying a small coarser adjustment. |
The same cup button collects a different amount
|
Actual espresso weight and the selected program | Measure the output before changing another setting. |
The needle looks familiar but the drink tastes wrong
|
Coffee, measured recipe and machine readiness | Compare taste and repeatability; do not chase the needle alone. |
The grind comparisons above apply to a single-wall basket. A dual-wall basket adds an outlet restriction, so its flow and gauge behavior need different interpretation. A sudden change across previously reliable recipes also deserves a water-supply and maintenance check.
Choose the basket and coffee amount
The portafilter is the handled holder that locks into the machine. The basket inside it holds the grounds.
For the broader preparation differences, see the guide to espresso machine controls.
Breville supplies single-wall and dual-wall baskets in one-cup and two-cup sizes. Wall type and serving size are separate choices: a two-cup basket is not necessarily dual-wall.
- Single-wall: the usual choice for freshly ground beans when you can adjust the grind. The prepared coffee bed provides much of the resistance to flow.
- Dual-wall: the manufacturer’s starting choice for preground coffee. Its extra outlet restriction does not make any grind or coffee amount suitable.
Confirm which basket is fitted before following a recipe. With replacement baskets, use their own capacity and compatibility guidance.
A useful starting comparison
The BES870 instruction book lists approximately 16–19 grams for the supplied two-cup baskets. Within that range, an 18-gram dose and 36-gram espresso output can be a practical first comparison with freshly ground coffee in the original two-cup single-wall basket, provided the coffee fits correctly after tamping.
Use 18 grams in and 36 grams out as a first comparison, then adjust for taste. Keep the dose steady, respect your basket’s capacity and avoid adding grounds simply to slow the shot.
Understand the controls before changing them
| Control | What it changes | What it does not establish |
|---|---|---|
| GRIND SIZE | How fine or coarse the grounds are | The final coffee weight or a guaranteed flavor |
| GRIND AMOUNT | How much ground coffee the grinder dispenses | An exact dose in grams |
| FILTER SIZE | The grinder’s SINGLE or DOUBLE selection for the basket size | Single-wall versus dual-wall construction |
| 1 CUP / 2 CUP | A preset brew, with an option to stop it early | A guaranteed espresso weight |
| PROGRAM | The stored shot volume for a cup button | A brewing-pressure setting |
If the basket contains too little coffee, correct the amount. If a suitable, consistent dose flows too freely through single-wall, investigate grind. If you collect too much espresso, check the stopping point.
Changing all three together makes it difficult to understand what helped.

Build a repeatable daily routine
Complete the manufacturer’s first-use setup before following this routine. For everyday brewing:
- Check the starting state. Confirm the water tank is filled and seated, the hopper is locked and the machine has completed its heating sequence. Keep the water and preparation routine consistent.
- Prepare the brewing parts. Warm the cup and portafilter as described in the manual. Dry the basket before adding grounds, and keep its rim clean.
- Match the basket selection. Use FILTER SIZE to select SINGLE for a one-cup basket or DOUBLE for a two-cup basket.
- Grind and check the amount. Weigh the dry portafilter and basket, tare the scale, then check the added grounds. Make sure the holder rests securely on the scale.
- Distribute and tamp. Spread the grounds evenly and tamp level. With the original accessories, the Razor tool helps check and trim the tamped filling level. If you trim grounds away, check the final dose when comparing recipes.
- Brew to a measured output. Place the glass on a scale, tare it and start the brew. Record the espresso weight, time and taste.
Use the same timing convention each time: starting the timer when you press the brew button includes pre-infusion. A time measured from the first drop describes a different interval.
Stir the espresso before tasting. If you make a milk drink, taste a little espresso separately first, then assess the finished drink. This helps distinguish an espresso adjustment from simply wanting less milk.
Adjust grind without losing track of the dose
On the BES870 control described here, smaller GRIND SIZE numbers mean finer; larger numbers mean coarser. The referenced instruction book suggests starting at 5; adjust for your coffee and basket.
For a comparison at a steady dose and output, see manual grind adjustments.
If you have reached the end of ordinary dial adjustment, review when calibration helps before using the BES870 upper burr procedure.
If your coffee already brews well, keep that setting. A new coffee or basket may need adjustment.
Keep coffee weight steady after a grind change
After changing GRIND SIZE, recheck how much coffee reaches the basket. Adjust the grinding duration if necessary to maintain the chosen dose. That keeps the comparison focused on grind rather than accidentally testing a different coffee amount too.
For manual dosing on this BES870, hold the portafilter against the grinding activation switch in the cradle, then release it to stop. Follow the machine’s handling instructions and weigh the result. The timed automatic dose is convenient, but its dial is not a gram setting.
Read the gauge alongside the drink
The machine begins with low-pressure pre-infusion before the main brew. A lower needle position at the beginning can therefore be normal.
During the main brew, compare the reading with how espresso collects and how it tastes. For a correctly filled, consistently prepared single-wall basket:
- If espresso repeatedly rushes and tastes thin or unpleasantly sharp, try one small finer step while keeping dose and output steady.
- If it barely flows, stop and check for overfilling or an obstruction. A small coarser step may then be appropriate.
- If flow is erratic between attempts, check preparation and actual amounts before stacking more adjustments.
These are useful checks, not one-cause diagnoses. Do not keep grinding finer solely to move the needle into a preferred position. A slower shot can still taste worse.
When to consider the upper burr
The BES870 has an adjustable upper burr to extend the grinder’s range. Consider that only after confirming the basket, dose, cleanliness and ordinary external adjustment. Use the procedure for your exact manual and change one position at a time. There is no universal inner-burr number to copy.
Control how much espresso the cup button collects
The Barista Express uses programmable shot volumes. Its cup buttons do not weigh the espresso in your glass, so check actual output when dialing in.

During a preset brew, pressing a cup button stops extraction. This lets you end a shot at your chosen output before the preset finishes. Allow for any remaining drips and record the final weight.
If the preset stops too soon, use manual mode for your next shot or reprogram the button. Avoid topping up with a second full preset.
Brew a shot manually
Manual mode controls one shot without changing the saved cup-button volumes:
- Prepare and lock in the portafilter. Place your glass on the scale and tare it.
- Press and hold 1 CUP or 2 CUP. Low-pressure pre-infusion continues while you hold the button.
- Release the button to continue with the main extraction.
- Press the same button again to stop at your chosen output; record the final weight after drips.
Keep the pre-infusion duration consistent while comparing grind changes.
Reprogramming a cup button
Once you have a useful recipe and want to store a convenient stopping point:
- Prepare the coffee and lock the portafilter into the group head.
- Press PROGRAM once; the machine beeps and the PROGRAM button flashes.
- Press the cup button you want to program to start brewing.
- Press that same cup button again at the desired amount. Two beeps confirm the new volume has been stored.
The saved setting remains volumetric. Recheck the collected weight after changing coffee, grind or basket rather than assuming the program preserves your recipe automatically.
Keep steaming and maintenance part of the routine
For milk drinks, establish the espresso first. Then steam fresh cold milk using the wand’s normal procedure. Return the steam dial to STANDBY before removing the wand from the milk, wipe it promptly and purge it as directed.

The BES870 automatically purges water into its drip tray after its espresso, hot-water and steam functions. Some water entering the tray is expected. Keep the tray seated and empty it when required; water collecting outside the machine needs a separate check.
If the next espresso differs after steaming, compare the machine’s ready state and your brewing routine before changing grind.
Cleaning and descaling are different tasks
Remove coffee residue from the basket and portafilter, clean the shower screen and follow the grinder-care instructions. Old residue or a restricted outlet can complicate recipe comparisons.
On the referenced BES870, a flashing CLEAN / DESCALE light calls for a cleaning cycle; a solid light calls for descaling. Confirm that indication in your matching manual and follow the complete procedure with the specified supplies. One task does not replace the other.
If water delivery suddenly becomes abnormal, the grinder jams, or leakage persists, pause recipe experiments and use the model’s troubleshooting or manufacturer support. Do not treat every new mechanical symptom as a reason to change the grind.
Common Barista Express questions
What is the best grind setting for a Barista Express?
Choose the working setting by comparing a suitable dose, measured output, flow and taste. Use the initial position in your matching manual when starting from scratch; a number copied from another owner may not suit your coffee.
Does the two-cup button make two identical shots?
It runs the selected shot program. You may collect the output in one glass or divide it between two, but the button does not guarantee equal weights in both cups or a particular dry dose.
Should I change temperature to fix sour espresso?
First check coffee, basket, readiness, dose, output and preparation. Temperature is another variable to compare once the basic recipe repeats. Use the BES870’s documented temperature mode rather than changing it alongside grind and output.
Do I need a separate grinder immediately?
Start by establishing what the built-in grinder can do with your coffee and basket. Consider another grinder when you can identify a limitation that affects your results. A purchase is not the first correction for an unmeasured recipe.
What should I record when I find a recipe I like?
Note the coffee, basket, dry dose, outer grind setting, any known upper-burr setting, collected espresso weight and shot time with its starting point. Add a brief taste note. This gives you a useful baseline for the next bag without treating the settings as permanent.







Leave a comment